Help with p18s!!

skidemon22

skidemon22

Active member
ok, is there any way i can swap out brakes on p18s? one of the brakes is broken and i need to put in another set. ive kinda tried but i dont want to break anything. please help! thanks
 
good fucking luck bending them I have gone thru three sets of brakes... then I learned when the din is at 17 the binding doesn't release your leg brakes off...

 
ok, i wasnt able to get the spring back in before i put the plate back on, so i got the plate on but now i dont know how to do the spring! and according to the tgr.com thing, a guy said that this is easier but i dont know how!help!!!!!
 
the easiest way i have found to do it is to put the binding back together, and push the spring in from the front. It takes a little effort, but its easier then the alternitive
 
ok, would mind elaborating. ive spent hoirs trying both ways and niether way is working for me. please let me know.
 
Put the entine binding back together with no spring, then you slide thebottom of the spring in (the open end without the loop) and you use a flathead screwdriver to push the loop down under thew brake, just take your time with it go slow and it will pop right over.
 
propaganda.jpg
propaganda.jpg
propaganda.jpg
propaganda.jpg
 
whaTEVER THAT IS SUPOSED TO MEAN, IT DOESNT HELP ME.

sorry about the caps lock.

I honestly dont understand why its so impossible to believethat the spring just wont go i did exactly MALONE i didnt mean to do that) said and i pushe but the way the brake pad is it doesnt all ow the spring to go. ive worked hard on this. if you all think that im retarded and have no common sense then fine. but, that would be untrue and ignorant to think that
 
Push the brake itself outward with something (screwdriver/ allen wrench) anf push down on the loop at the top of the spring
 
You must log in or register to reply here.
Back
Top