Having issues with my t2i

the.cheat

the.cheat

Active member
alright so i went to turn it on this morning, it said the card was not compatible or something, change card. so i did, wouldnt even turn on. tried formattig the first card in camera, wouldnt, reformatted them both on the computer with some software i downloaded, wouldnt work. i even bought a new card, wouldnt turn on with that either. i have ml installed but its been working great for the past few weeks, and my two first cards have also been working just fine. any help? thanks
 
fucking_magnets-e1280755945666.jpg
 
....? uncalled for? and yeah i tried taking out the battery and i tried it with my standard canon one and cheapo china batteries just for kicks.
 
you said it wouldn't turn on, then you said you formatted your card in camera... how does that work?
 
If you're on a mac, open up disk utility. It will erase all data on your card, then you can reinstall ML. Should do the trick.
 
google is your friend, or if you have a friend with a mac and an sd reader, you can do it on his/her computer
 
you've bricked your t2i. the only way i am aware you can fix this is put your card in another camera if you have one, if not borrow a buddy's or gf or someone and run a low level format. then put it in your camera and it should boot up, but ML won't be running, so you just need to re-install everything again. this may have happened by accidentally deleting one of the ML files off your card.
 
uhhhhh shit. i know one kid who has one il have to call him and ask. do i need to reinstall ml on the camera if i decide to do it again? or just the cards. this doesnt sound good :( you 100% sure its bricked?
 
Uhm you might've already said, but is your SD Card locked? On the side of the card there will be a little switch that says lock and if it is just slide it in the opposite direction.
 
yeah man, but it's an easy fix. just run the low level format so the sd is empty then do the exact same install you did, install it on the card, and on the camera. that should fix it.
 
how am i supposed to reinstall it on the camera when it won't boot with a card in it? will doing a low level format allow it to boot with the card?
 
also i went to target to do a low level format on the t2i they have on display (lol) and it still wont boot with the formatted card with nothing on it. its weird, it autofocuses and i can see whats going on with aperture and what not in the viewfinder, but no recording/picture taking/lcd action.
 
it's definitely bricked man. that's the only way i'm aware that fixes it. if it doesn't run with the formatted card then i don't know what to say. sorry man, your best bet i think is to email some ML developers.
 
You must log in or register to reply here.
Back
Top