Got the best thing ever in the mail today.

[weastcoat]

Check it out. My most recent dosage of

WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours

came in the mail today.



What a sleek packaging design and impeccable unboxing experience. Check this pic, it even teases you with real-size designs of the epoxy canisters on each side of the box.





and boy oh boy does this shit get me going every time. Pulled the tubes out of the 1000 IQ packaging and low and behold… there they were. Two fresh tubes of WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours right in the flesh.



Not sure about you guys but it’s stuff like this that really makes my week.

 

[Raf.Diaz.]

So what’s your promo code?

**This post was edited on Oct 28th 2022 at 6:56:16pm

 

[Quaggy]

Not sure about you guys but it’s stuff like this that really makes my week.

Not only does it make my week knowing you got yourself some WEST SYSTEMS G/flex 650 which is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours...

It makes me weak in the knees ??

 

[weastcoat]

So what’s your promo code?

**This post was edited on Oct 28th 2022 at 6:56:16pm

WEATCOAST28

 

[eheath]

this is borderline a spam post

 

[ski_salmon69]

Girly ass hands

 

[snowpea88]

Girly ass hands

 

[bertBertson]

WEST SYSTEMS G/flex 650 is a toughened, versatile...

....and boy oh boy does this shit get me going every time. Pulled the tubes out of the 1000 IQ packaging and low and behold… there they wereWEST SYSTEMS G/flex 650 is a toughened...

WEST SYSTEMS G/flex 650 which is a toughened, versatile, liquid epoxy for permanent...

Oh god here we go again

 

[weastcoat]

Girly ass hands

I know it’s because my girlfriend (you wouldn’t know her she goes to another school) took these pics.

 

[BLandz]

I use JB weld, bring on the downvotes

 

[ReturnToMonkey]

G flex is quite amazing but it never really had as long of a pot life as advertised but that's to be expected honestly. So far the broken skis I fixed with two pounds of it have been working

 

[PsychicMigration]

Heard that's what skierman uses for lube.

 

[MaimHelp]

this is borderline a spam post

Shotgun race it with [tag=244295]@weatcoast[/tag]

 

[Lenny-]

Luckily when mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. Plenty of time to get some rear end work done.

Heard that's what skierman uses for lube.

 

[skierman]

this is borderline a spam post

Yeah, if you're fucking dumb enough to read it

 

[gussin_it]

only thing i wanna get in the mail is a pipe bomb from the unabomber

 

[skierman]

only thing i wanna get in the mail is a pipe bomb from the unabomber

He didn't use pipe bombs, you ignorant prick.

 

[gussin_it]

He didn't use pipe bombs, you ignorant prick.

[video]https://www.newschoolers.com/videos/watch/1053888/trim-18788763-5640-441B-ADCD-FD396D85E365-MOV[/video]

skierman confirmed as teddy k?!?

 

[cool_name]

Op knows you can order real drugs online, right?

 

[GayWolf420]

[tag=261198]@dolanslebensraum[/tag] Comment? Can you confirm?

 

[Non_State_Actor]

G flex is quite amazing but it never really had as long of a pot life as advertised but that's to be expected honestly.

Agreed on the pot life, though I'm usually mixing up like tablespoons maybe, usually just a bit, which might effect the working time?

I need to pull out the tubes and do some topsheet repairs before the season begins in a couple weeks.

 

[ReturnToMonkey]

Agreed on the pot life, though I'm usually mixing up like tablespoons maybe, usually just a bit, which might effect the working time?

I need to pull out the tubes and do some topsheet repairs before the season begins in a couple weeks.

Using large batches should shorten the pot life not small ones. They cure with heat so when there's a large volume of uncured epoxy, the heat can't go anywhere except the epoxy next to it, curing it faster. Not really a huge deal with G Flex but industry epoxy applications must heavily take this into consideration

 

[mrk127]

Praise G-flex, all my homies love G-flex

 

[OregonDead]

I like epoxy and I like this post

 

[kflobutler]

The epoxy wizard

Check it out. My most recent dosage of

WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours

came in the mail today.

View attachment 1053795

What a sleek packaging design and impeccable unboxing experience. Check this pic, it even teases you with real-size designs of the epoxy canisters on each side of the box.

View attachment 1053796

View attachment 1053797

and boy oh boy does this shit get me going every time. Pulled the tubes out of the 1000 IQ packaging and low and behold… there they were. Two fresh tubes of WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours right in the flesh.

View attachment 1053798

Not sure about you guys but it’s stuff like this that really makes my week.

 

[rojo.grande]

if she's good enough to re hull my boat, she's good enough for me to tear the edges out of my wets and ride em all season

 

[MaimHelp]

if she's good enough to re hull my boat, she's good enough for me to tear the edges out of my wets and ride em all season

last summer my dad needed to repair one of our canoes before he took it out and was shopping for epoxy. Luckily I had

WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours.

he didn’t even have to go out and buy epoxy because when he told me what he needed I realized

WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours

was perfect for the job

 

[TRVP_ANGEL]

damn when bro said "Check it out. My most recent dosage of WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours

came in the mail today.

What a sleek packaging design and impeccable unboxing experience. Check this pic, it even teases you with real-size designs of the epoxy canisters on each side of the box.

and boy oh boy does this shit get me going every time. Pulled the tubes out of the 1000 IQ packaging and low and behold… there they were. Two fresh tubes of WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours right in the flesh.

Not sure about you guys but it’s stuff like this that really makes my week."

i felt that

 

[rojo.grande]

best preseason thread of this year /claim

 

[chimpansteeze]

 

[BingPow]

Gonna give it a shot gotta fill in some ripped out edge, I also got the adhesive filler in my kit, y’all think it’s necessary or helpful for filling in the edge?

 

[weastcoat]

Gonna give it a shot gotta fill in some ripped out edge, I also got the adhesive filler in my kit, y’all think it’s necessary or helpful for filling in the edge?

It’s beyond necessary

 

[skiP.E.I.]

Time to lay up a pair of Big Horns with purely West Systems G-Flex Epoxy

 

[alpineplease]

Damn I really thought a syndicate of NS’ers owned this company.

Still bought some.

 

[beyonson]

there's definitely a lot better things that could come in the mail

 

[muffMan.]

there's definitely a lot better things that could come in the mail

I really can’t think of something better than WEST SYSTEMS,

G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours

 

[weastcoat]

there's definitely a lot better things that could come in the mail

oh yeah like what

 

[tutipups]

oh yeah like what

osama pros but g flex the best

 

[TRVP_ANGEL]

Some times the side chick aint even a chick. Its WEST SYSTEMS G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI, it is a bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives it the ability to make structural bonds that can absorb the stress of expansion, contraction, shock, and vibration. It is ideal for bonding dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours right in the flesh

 

[Lenny-]

oh yeah like what

Are you tired of cold hands ruining your outdoor activities? Do you wish you had a reliable and convenient way to keep your hands warm and cozy? If so, you need to check out the Ocoopa Union 5s hand warmers!

The Ocoopa Union 5s are not your ordinary hand warmers. They are packed with an incredibly large 10000mAh battery cell 21700 that can provide up to 15 hours of heat on a single charge. That's enough to accompany you all day long, whether you're hiking, skiing, camping, or just enjoying a stroll in the park.

But that's not all. The Ocoopa Union 5s also have a detachable and rechargeable battery core that enables you to refill your hand warmer for another 15 hours of use anywhere and anytime outdoors. You don't have to worry about running out of power or finding an outlet. Just swap the battery core and enjoy uninterrupted warmth.

The Ocoopa Union 5s also have a 3-second heating feature that delivers comfortable warmth to you in a flash. No more waiting for your hand warmer to heat up or fiddling with buttons. The Ocoopa Union 5s also have a temperature memory function that allows you to enjoy just the right warmth as soon as you turn on the device.

And if you want to adjust the heat level, you can choose from 4 different settings with Ocoopa's new intelligent and precise temperature control technology. You can find the perfect warmth for your preference and comfort. No more compromise, no more discomfort.

The Ocoopa Union 5s also have a 360° heating surface that warms up your entire hand in seconds. You can feel the ideal warmth from your palm to your fingertips. No longer let any part of your hand be forgotten by warmth.

And if you're looking for style as well as function, the Ocoopa Union 5s have you covered. They come in various colors and designs that match your mood or your outfits. They have a sleek but non-slip finish, a unibody and ergonomic design for comfort and firm grip.

So what are you waiting for? Don't let cold hands ruin your fun. Order your Ocoopa Union 5s hand warmers today and enjoy the warmth tailored to you!

 

[ski_salmon69]

View attachment 1068104 Are you tired of cold hands ruining your outdoor activities? Do you wish you had a reliable and convenient way to keep your hands warm and cozy? If so, you need to check out the Ocoopa Union 5s hand warmers!

The Ocoopa Union 5s are not your ordinary hand warmers. They are packed with an incredibly large 10000mAh battery cell 21700 that can provide up to 15 hours of heat on a single charge. That's enough to accompany you all day long, whether you're hiking, skiing, camping, or just enjoying a stroll in the park.

But that's not all. The Ocoopa Union 5s also have a detachable and rechargeable battery core that enables you to refill your hand warmer for another 15 hours of use anywhere and anytime outdoors. You don't have to worry about running out of power or finding an outlet. Just swap the battery core and enjoy uninterrupted warmth.

The Ocoopa Union 5s also have a 3-second heating feature that delivers comfortable warmth to you in a flash. No more waiting for your hand warmer to heat up or fiddling with buttons. The Ocoopa Union 5s also have a temperature memory function that allows you to enjoy just the right warmth as soon as you turn on the device.

And if you want to adjust the heat level, you can choose from 4 different settings with Ocoopa's new intelligent and precise temperature control technology. You can find the perfect warmth for your preference and comfort. No more compromise, no more discomfort.

The Ocoopa Union 5s also have a 360° heating surface that warms up your entire hand in seconds. You can feel the ideal warmth from your palm to your fingertips. No longer let any part of your hand be forgotten by warmth.

And if you're looking for style as well as function, the Ocoopa Union 5s have you covered. They come in various colors and designs that match your mood or your outfits. They have a sleek but non-slip finish, a unibody and ergonomic design for comfort and firm grip.

So what are you waiting for? Don't let cold hands ruin your fun. Order your Ocoopa Union 5s hand warmers today and enjoy the warmth tailored to you!

bro think he Paul Brown

 

[Lenny-]

bro think he Paul Brown