FKS Remounting

milo-mcsenderson

Member
Staff member
Hi all,

I'm currently looking at some second hand icelantic nomad 95s, they have been drilled centre for a 26.5 sith FKS, I am a 27.5 (318mm) and am after some FKS to mount on these, how far back would I have to move the bindings so they're not too close to the original holes, or would I be able to get away with just remounting the heels?

Also, where's the line on the 95s? -2/-2.5 might be a more preferred mounting point anyway
 
You could just remount the heel. Or you could remount the entire binding. If you go back 2 or 2.5 you shouldn't have any issues at all. And re mounting just the heel will be easy too, and will bump you back a tiny bit from center
 
Just remounting the heel would be easiest, if you change the whole stance back I would recommend using a jig to check for overlap on the holes and to get the hole placement accurate for good adjustment on the FKS.
 
Back
Top