Din adjusment on armada N l10 bindings

[tutipups]

i know theyre complete shit but they keep prereleasing and i need to know whats the screw to raise the din



should be this one right?

 

[Farmville420]

90% chance it’s fwp and not din

 

[tutipups]

90% chance it’s fwp and not din

so it would be that tiny screw on top?

 

[GYRO_LTD]

No bro it’s the big one one the front like every other binding shaped like that

 

[Farmville420]

View attachment 1065514

so it would be that tiny screw on top?

Idk about armada bindings but fwp is usually a screw in the heel piece and it will move the heelpiece forwards and backwards

 

[Vish-shoe]

Just twist it and see if the indicator moves

 

[tutipups]

No bro it’s the big one one the front like every other binding shaped like that

oh god this makes it worse

 

[tutipups]

Just twist it and see if the indicator moves

guess thats what ill do. also need to find where the thing for rear din is since im a moron

 

[Vish-shoe]

guess thats what ill do. also need to find where the thing for rear din is since im a moron

Should be the big screw right there

 

[tutipups]

View attachment 1065517

Should be the big screw right there

theres a few screws there.

 

[Vish-shoe]

The biggest one, in line with the din indicator

 

[GYRO_LTD]

Big screw facing straight back the only other screws should be 4 smaller screws going into the ski

 

[tutipups]

The biggest one, in line with the din indicator

i imagine i have to raise the heel part to get the screw for the din.



seems like the hole is a bit big and shouldnt be a bit visible from the outside

 

[tutipups]

so is that flathead shaped thing supposed to ajust heel din because it goes really deep

 

[BradFiAusNzCoCa]

This thread is a mess ?

But yes rear screw is usually FWP because you adjust the distance and get the heel nice and snug next to boot which gets nice and snug next to toe piece, as it doesn’t move.

 

[tutipups]

This thread is a mess ?

But yes rear screw is usually FWP because you adjust the distance and get the heel nice and snug next to boot which gets nice and snug next to toe piece, as it doesn’t move.

so then where is the rear din screw?

 

[BradFiAusNzCoCa]

Actually I looked too quickly. I believe those bindings you raise the rear tab under heel and push forward until the yellow is halfway in the indicator.

But honestly man, if you’re not 100% - probably shouldn’t do it yourself

so then where is the rear din screw?

 

[tutipups]

Actually I looked too quickly. I believe those bindings you raise the rear tab under heel and push forward until the yellow is halfway in the indicator.

But honestly man, if you’re not 100% - probably shouldn’t do it yourself

dont see how that would work. i mean worse thing that could happen tommorow is i ride at 7 din front and 6 rear anyways so might just wait and bring it into the shop

 

[BradFiAusNzCoCa]

It looks like Rossignol system where you jam screwdriver under the tab. I’m talking about fwp. Idk I’ve confused myself now. Take it into shop

View attachment 1065528

dont see how that would work. i mean worse thing that could happen tommorow is i ride at 7 din front and 6 rear anyways so might just wait and bring it into the shop

 

[tutipups]

It looks like Rossignol system where you jam screwdriver under the tab. I’m talking about fwp. Idk I’ve confused myself now. Take it into shop

yeah better to spend 20 bucks at most than be done for the ski season

 

[Non_State_Actor]

I have a pair in a box I can check. (They're for kids/tween skis)

 

[tutipups]

I have a pair in a box I can check. (They're for kids/tween skis)

eh good luck finding it

 

[Non_State_Actor]

https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

 

[hegleezy]

armada bindings????

 

[Slowbro]

armada bindings????

rebranded Salomons, same parent company

 

[Juviticus]

https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

In the plastic on both sides of the metal tab there are cutouts on the top. When boot is in, look through the channels from the side and the end of the metal tab should be between them



Just lift the metal tab with a flat head like the Rossi SPX which someone said

**This post was edited on Feb 27th 2023 at 10:29:36pm

 

[Juviticus]

If u can, hit the shop tho

 

[tutipups]

In the plastic on both sides of the metal tab there are cutouts on the top. When boot is in, look through the channels from the side and the end of the metal tab should be between them

View attachment 1065549

Just lift the metal tab with a flat head like the Rossi SPX which someone said

**This post was edited on Feb 27th 2023 at 10:29:36pm

oh thanks

 

[tutipups]

https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

seems like its hard to find info on any binding that isnt an sth2 an attack or a pivot

 

[Non_State_Actor]

seems like its hard to find info on any binding that isnt an sth2 an attack or a pivot

I guess it's folks like us that are doing how-to videos on youtube and shit? Those are your top three binding recommendations on NS for sure. A few people that like griffons and jesters as well.

 

[Juviticus]

oh thanks

Oh and yeah the flathead screws are for dins

 

[tutipups]

I guess it's folks like us that are doing how-to videos on youtube and shit? Those are your top three binding recommendations on NS for sure. A few people that like griffons and jesters as well.

not just us but why would anybody who cares buy a shitty binding like mine anyways.

 

[tutipups]

Oh and yeah the flathead screws are for dins

yeah saw that in the article thanks

 

[tutipups]

https://www.google.com/amp/s/amp.issuu.com/salomonnz/docs/salomon_tm_alp_2021_72dpi/s/11188080

I'm still sort of confused as to where the indicator for proper forward pressure should line up. Sort of hard to find information on this binding tbh.

If you take it to a shop ask if the tech can show you what they're going to do.

that site is so weird.