COnnecting PVCS?

[396222687862]

I'm taking at look at home depot real soon. If i remember correctly, the sizes are about 8 or 10 feet long. I'm loooknig for something longer, how can i attach the 2 rails, but not have any bumps or anything. I'm just starting to learn rails too.

 

[fillup]

well if you put both on the same level wood it shouldnt really be a problem

if nessesary make on higher then the other so you drop down and dont catch an edge

 

[chapz]

yeah fi youre gonna do that, make the first one, even half an inch taller

 

[542East]

or make the second section be a down part and have a kink in the rail

 

[jjibs1219]

they have these connecter pvc pipes that are like 4 inches long that you take this special pipe glue (its like purple and blue goo in a can) and put the glue on one end of the connecter, slide that same end into the long pvc, then do the same thing just the other way...they should be completely level if you do it carefully

 

[fillup]

thats seems to be the best

 

[Alkyy]

best way would be to use a pvc welder (assuming you had the money to buy one for one time) its like a hot air gun that has a stick of plastic that is fed into it and the plastic welds it harder then the pipe its self

 

[Edward.]

having two seperate ones would be a lot more fun, you can practice your switch ups easier and do a lot more stuff than you can do on a regular down rail or straight rail or whatever

 

[Bees_Knees]

ya they make specail glue just for pvc

 

[steevner]

pvc comes in 12 foot pieces too, but you could prob get the connector piece that guy was talkin about and glue them together, then sand it down so it's flush