Changing marker griffon demo bindings for marker duke in same holes?

[shure2]

does anyone know if i will be able to swap over my marker griffon demo bindings for marker dukes without re-drilling my skis?

 

[Flying~Squirrel]

yes you can

 

[Evilchris]

demo bindings typically have a really weird hole pattern to accomidate for the demo track. I would be VERY surprised if they worked out

 

[jKutcher]

they will work out. There is just 1 extra hole you will have to plug

 

[alexg1687]

you can not take screws out of skis then put other ones back in the same holes without first sealing the holes. the threads could be different, but even if they're not it just wont work very well. massively increases the chance of pulling them out of the ski because the threads can overlap. when you're talking about 1cm of wood that's not a good idea...

 

[N.L.]

for sure^ if you do try anyways, put the screws in without tearing up the old threads, and use wood glue. your best bet is to mount them a half an inch forward or back, you wont notice and you wont worry about pulling a toe piece out.

 

[LC.]

Different hole pattern bro. Let your shop handle it.