N nefferbackdown Member May 12, 2009 #1 Can anyone explain to me how to change the outriggers of my Oakley Crowbars? I really don't want to break them...
Can anyone explain to me how to change the outriggers of my Oakley Crowbars? I really don't want to break them...
Legion Active member May 12, 2009 #2 join the crowbar cult for videos and instructions. besides that, crowbars are very tough, so its hard to break them
join the crowbar cult for videos and instructions. besides that, crowbars are very tough, so its hard to break them
no_steeze Active member May 12, 2009 #3 pull the bottom of the rigger hard until it pops out, then twist and wiggle the top part outif you torque the top part too hard it can break but other than that it's pretty difficult to break them
pull the bottom of the rigger hard until it pops out, then twist and wiggle the top part outif you torque the top part too hard it can break but other than that it's pretty difficult to break them
M MAjibber Member May 12, 2009 #4 there are notches at the top and bottom. push in the notches and pull out the outriggers.
