Animal.Party
Member
Im looking to take bindings off one pair of skis and put them on another. Do I need any special tools or just a screw driver or drill. Or should i just take them to the shop?
Bindings
- Thread starter Animal.Party
- Start date
![smile=]](/data/avatars/m/119/119106.jpg?1745610682){kind=avatar}
sometimes going to a shop isnt an option, and if you dont have a personal tech at a specific shop, you could be trusting a drunkard to mount you up.
you need a special phillips head screwdriver called #3. its teeth are bigger than a regular phillips head, so if you dont use the big one you could strip your screws. after you take the bindings off, clean them and inspect them. GLUE! you have to put wood glue in the holes of the skis you want to remount them on, mount the bindings taking care of not overtightening the screws and stripping the wood in the skis. let them dry overnight, and you're good to go.
you need a special phillips head screwdriver called #3. its teeth are bigger than a regular phillips head, so if you dont use the big one you could strip your screws. after you take the bindings off, clean them and inspect them. GLUE! you have to put wood glue in the holes of the skis you want to remount them on, mount the bindings taking care of not overtightening the screws and stripping the wood in the skis. let them dry overnight, and you're good to go.
concept311
Active member
if you don't have the right screw drive or Bit for a drill. you will strip the screws
Animal.Party
Member
yea these skis are just going to be for jibbin around on nothing to serious. Why do I put wood glue in the holes of the skis I'm mounting the bindings to? Like im going to be putting screws in the hole filled with wood glue? Thanks