Adjusting Look Pivot Bindings
- Thread starter akajoe75
- Start date
Yeah its a little more than just philips head until it comes off the back.
Put your boot in the binding but not click in
Move the heelpiece forward or back on the track using a philips screwdriver on tha back of the lower part of the heelpiece.
If the heelpiece slips off of the track either way you need a remount (that track actualy has quite alot of movement so you should be more than ok if you just switching a size or two)
If it doesnt slip off click the boot in when it 'looks like' it would fit
Then adjust the screw in the back that you were moving the track with so it fits flush or SLIGHTLY out of the innermost part of the u shape plastic it sits in.
Click the boot in and out a few times, checking the screw in the back, just to make sure the heel piece caught on the track in the right place.
Check that screw with your boot in periodically because they do have a tenedency to slip on it.
Or just use the search and you would have found this out.
Put your boot in the binding but not click in
Move the heelpiece forward or back on the track using a philips screwdriver on tha back of the lower part of the heelpiece.
If the heelpiece slips off of the track either way you need a remount (that track actualy has quite alot of movement so you should be more than ok if you just switching a size or two)
If it doesnt slip off click the boot in when it 'looks like' it would fit
Then adjust the screw in the back that you were moving the track with so it fits flush or SLIGHTLY out of the innermost part of the u shape plastic it sits in.
Click the boot in and out a few times, checking the screw in the back, just to make sure the heel piece caught on the track in the right place.
Check that screw with your boot in periodically because they do have a tenedency to slip on it.
Or just use the search and you would have found this out.
PowderCanuck
Active member
^that explanation could cause some confusion, so I'm gonna resay what he said just to make sure you don't screw up.
Turn the screw back (or forward) until the boot fits in the binding.
Click the boot in.
Check the screw (while the boot is in) to make sure the screw is flush with the plastic of the binding.
If it's not flush, pop the boot out and turn the screw a bit in the proper direction. (you can't turn the screw while the boot is in because sometimes it won't set properly)
Pop the boot back in to check again.
When the screw is flush while the boot is in, set your din ect.
______________________
NoPoles: 'Firefox is the big up and comming browser. It's better than IE in just about every way.'
You heard it straight from the man kids, get Firefox.
Screw this I'm going skiing
Turn the screw back (or forward) until the boot fits in the binding.
Click the boot in.
Check the screw (while the boot is in) to make sure the screw is flush with the plastic of the binding.
If it's not flush, pop the boot out and turn the screw a bit in the proper direction. (you can't turn the screw while the boot is in because sometimes it won't set properly)
Pop the boot back in to check again.
When the screw is flush while the boot is in, set your din ect.
______________________
NoPoles: 'Firefox is the big up and comming browser. It's better than IE in just about every way.'
You heard it straight from the man kids, get Firefox.
Screw this I'm going skiing
Hi guys,
Thanks a lot for the instructions, they've helped a ton. Now, I am confused about just one thing--when you say 'take out the boot and check that the screw is flush w/ the boot' how can you check that? I'm not seeing the other end of the screw on the other side...?
Thanks fellas
Thanks a lot for the instructions, they've helped a ton. Now, I am confused about just one thing--when you say 'take out the boot and check that the screw is flush w/ the boot' how can you check that? I'm not seeing the other end of the screw on the other side...?
Thanks fellas
PowderCanuck
Active member
read mine.
check the screw is flush with the binding while the boot is clicked in
______________________
NoPoles: 'Firefox is the big up and comming browser. It's better than IE in just about every way.'
You heard it straight from the man kids, get Firefox.
Screw this I'm going skiing
check the screw is flush with the binding while the boot is clicked in
______________________
NoPoles: 'Firefox is the big up and comming browser. It's better than IE in just about every way.'
You heard it straight from the man kids, get Firefox.
Screw this I'm going skiing
Huckasorass
Active member
What are you guys talking about, 'if it comes off the track you need a remount' just turn the phillips until it goes back on
dammitmike
Active member
^no they mean that if the peice comes off the track because the new boot is too large or too small then you need a remount to fit the boot to the binding. as long as you can adjust the heel peice so that the new boot fits while the heel peice is still on the track and can be secured then your fine
johanblaze
Active member
that little hole in the back on the binding is where you adjust it at. make sure you know what you were doing.
...and justice for all
...and justice for all
devine
Active member
^word, and even if it does fit the trak fine , if you moved it alot consider a remount cous the centerpoint of your mount is off now and say you have sole center on a pair of publicenemies and you have a new boot your farther back on the tail now.
just something to consider
member#13687
'i just rented good will hunting , how is it?'
'lets put it this way, even matt damon cant make it suck.'
'matt damon? hes in con air right?'
'yes , yes he is.'
just something to consider
member#13687
'i just rented good will hunting , how is it?'
'lets put it this way, even matt damon cant make it suck.'
'matt damon? hes in con air right?'
'yes , yes he is.'