2015 Volkl Bridge 171

[stringbenis]

2015 Volkl Bridge size 171

Solomon z12 bindings mounted with 26.5 boots BSL 302 mm

Skied on 2 seasons

No major scratches no core shots

hmu$250 OBO

 

[Brence31]

Hey I have a couple questions on your bindings. I bought atomic z12 bindings and I know there pretty much the same, how did the bindings hold up/ perform for you. And another question does the release on the he have slop in it when theres a boot in the binding? Bc mine has slop and was wondering if that's normal for the z12.

 

[ThaLorax]

Hey I have a couple questions on your bindings. I bought atomic z12 bindings and I know there pretty much the same, how did the bindings hold up/ perform for you. And another question does the release on the he have slop in it when theres a boot in the binding? Bc mine has slop and was wondering if that's normal for the z12.

The Z12/Z10 binding are identical between the brands. Only the brand name is different. The Z series are one of the lightest weight alpine bindings on the market, but that also means that they're one of the least durable ones. If you have slop in the toe piece, check to make sure you didn't break one of the rollers. I find them soft, they pre-release a ton, and don't transfer power well. They're fine for a Joe Shcmo groomer, easy bumps and light powder skier

 

[Brence31]

The Z12/Z10 binding are identical between the brands. Only the brand name is different. The Z series are one of the lightest weight alpine bindings on the market, but that also means that they're one of the least durable ones. If you have slop in the toe piece, check to make sure you didn't break one of the rollers. I find them soft, they pre-release a ton, and don't transfer power well. They're fine for a Joe Shcmo groomer, easy bumps and light powder skier

Well I already have them mounted to my new skis and I'm looking for more out of them then what you described. This really sucks. What would my options be at this point?

 

[ThaLorax]

Well I already have them mounted to my new skis and I'm looking for more out of them then what you described. This really sucks. What would my options be at this point?

Just sell them and get a different binding with a different screw pattern

 

[Brence31]

Just sell them and get a different binding with a different screw pattern

If I bought a pair of marker griphon 13s would I be able to mount them in the same place I have the atomics now? I want to keep the +2.5 I have them set at.

 

[ThaLorax]

If I bought a pair of marker griphon 13s would I be able to mount them in the same place I have the atomics now? I want to keep the +2.5 I have them set at.

If it's only the ski's 2nd mount and coming from Z12s..... youre probably fine. Check to make sure there's decent spacing (~1cm) between the new screws and the old holes. If it's close, I'd move the mount back ~1cm.

We're clogging up this guy's sale thread. Message me if you have more questions.

 

[stringbenis]

Lol you guys good. They sold. But you’re right. Super lightweight and eleedgedly not very durable. I was able to use these skis in the park and stomping some big booters without too much pre release. Just don’t push them harder than they are meant. They’re just plastic.