alright, so to attach the rail, you are gonna need a drill, some 3/4" wood screws, a screw driver and of coarse some wood and PVC. So when sliding PVC, you want the top to be very smooth, so you dont want to drill holes on top of the pvc, where you are going to slide. So first you want to drill a hole the size of the screw inbetween the direct side of the PVC and the top, so at an angle. you want to alternate sides, so that the PVC doesnt wiggle. Then you want to drill a hole on the bottom of the PVC, that is smaller than the head of the screw, but big enough for the threads to get through. then you want to put your screws on the screwdriver tip (hopefully its a magnetic head) if its not, then you have to drop the screws i the big hole and try to get them to come out the bottom hole (Hardest Part). Then make sure the screws dont come out of their holes and screw them into the wood. Takes a little while to master, but it gets easier as you figure it out, PM me if you have anymore questions, or if you need clarification.
what is the white stuff u uesd to get speed (0:40) called and where did u get it i built my set up but (as some might disagree) snow fence doesnt worl all that well
![.Salomon Backyard Contest Entry. - [Blank] Productions](/data/xfmg/thumbnail/308/308048-e04e1a2ee8416682eabfb49de3b4e373.jpg?1257807600)
